Lamborghini Gallardo Service Guide

Lamborghini Gallardo Service Guide

Beverly Hills Lamborghini Gallardo Repair & Service

Looking for Lamborghini Service, Repair & Maintenance in Beverly Hills? You’ve come to the top trusted and trained service station in the country!

Since the Lamborghini Miura was unveiled at the 1966 Geneva Motorshow, the Sant’Agata-based automaker continues to churn out poster-worthy supercars. Their most popular model to date, the Lamborghini Gallardo, continued the supercar trend for the company for over a decade, being replaced by the Lamborghini Huracán for the 2014 model year.

A total of 14,022 units of the Lamborghini Gallardo were built during its 10-year product cycle

This Lamborghini Gallardo Service Guide will be a useful reference guide for owners looking to maintain and properly service their Gallardo.

Don’t forget to check out our Lamborghini Murcielago Service Guide & Lamborghini Huracan Service Guide

Being the “baby” of the range, the V10 Gallardo was more useable than it’s more powerful sibling, the Lamborghini Murciélago.

Many Gallardo variants were spawn throughout it’s decade long tenure to spur buyers and keep this model selling for 10 years!

There were essentially two generations being heavily revised in for the 2008 model year. This Lamborghini Gallardo Service Guide shows the same maintenance intervals for both generations.

The maintenance and service schedule will be outlined below.

Lamborghini Gallardo Service Guide Interior Image

Gallardo Engine, Oil, Transmission, Clutch

The Lamborghini Gallardo uses a mid-mounted V10 engine. In the first generation Gallardo (2003-2007) used a 5.0L version with 500 hp, while the revised second generation used a larger, more powerful 5.2L version with around 550 hp.

These were the two main engines, with model variants using tuned versions of these engines.

The Gallardo was offered with either a manual 6-speed transmission or a 6-speed automated manual transmission and clutch drivetrain, known as E-Gear. Both engines have the same service intervals as the 5.2L is a derivative of the original 5.0L engine.

Lamborghini Gallardo Service Guide Oil Filter


The Lamborghini Gallardo Service Guide recommends this maintenance interval schedule:

Lamborghini Gallardo Annual Service Guide

In order to make sure that all components are working as they should, vehicle owners need to get a visual inspection of the entire vehicle during each service visit.

All models (or variants) of the Lamborghini Gallardo require annual oil change and filter replacement or every 7500 miles (which ever comes first). In order to ensure your V10 Gallardo engine is getting the best oil lubrication for all parts of the engine you must change the oil and replace the oil filter regularly!

These V10 engines have been proven to be extremely reliable provided proper annual maintenance has been performed as outlined in this Lamborghini Gallardo service guide.

The recommended maintenance schedule as outlined above mentions inspections that should be done in more depth at those intervals. The major services are done at every 30,000, which includes all recommended maintenance, with the exception of replacing the oxygen sensor.

Lamborghini Gallardo Service Guide Clutch

Note that the Lamborghini Gallardo Service guide is recommending these if driven regularly on public roads. If the vehicle is tracked, wear and tear will be accelerated and should be serviced earlier and more frequently than the schedule outlined above.

Gallardo Brakes, Rotors, Pads, Fluid

In order to perform well on and off track, the Lamborghini Gallardo is equipped with serious brakes. Other than the high-performance Superleggera variant, Gallardos come standard with steel brakes, where carbon-ceramic brakes became an option in the second-generation cars (2008+).

Depending on your driving style, brake wear will vary between owners vehicles. This is why it is important to inspect the brake wear at each service interval. Brake pads and rotors must be inspected and the brake fluid must be changed every 2 years to ensure that the system isn’t contaminated with moisture, air or dirt.

The brake fluid system is a closed system, yet over time, seals, hoses and gaskets start to wear and degrade and will contaminate the brake fluid making it less effective of stopping your vehicle when you need to!

Don’t be cheap, never neglect your engine oil changes, filter replacements and brake services!

The standard steel brakes are powered by 8 piston calipers up front and 4 piston calipers in the rear. They are 365 mm in the front and 335 in the rear. The optional carbon-ceramic brakes are larger with 380 mm up front and in the rear with 6-piston calipers at each corner.

The benefit of carbon-ceramic brakes is that they are lighter, remove excess unsprung mass and generally tend to last much longer than their steel counterparts. On the flip side, having to replace a carbon ceramic brake will cost you several thousand dollars more compared to replacing the standard steel brakes.

Lamborghini Gallardo Service Guide Brake Rotors

Gallardo Tires, Suspension & Alignment

Tires are also wearable items that need to be checked at every service interval. Unfortunately, many owners tend to ignore their tires. As they are the only part of your vehicle that are in contact with the ground, they affect handling, acceleration, braking, and crucially, safety. Wear will vary depending on driving conditions, driving style, and whether or not the vehicle is all-wheel drive or not.

Lamborghini Gallardo Service Guide Coilover Kit

The Lamborghini Gallardo comes with these tire sizes:

GI Automotive carries a wide selection of road and track Lamborghini Gallardo tires on stock and available to order. A free consultation is available to determine which tire is best for your individual driving needs.

FRONT: 235/35/R19

REAR: 295/30/R19

Alignment can seriously affect both tire wear and the handling characteristics of a car. Therefore, it is imperative that the alignment is checked on a regular basis.

The Lamborghini Gallardo Service Guide recommends checking camber, castor, and toe for tolerances within factory specification, or a custom specification if deemed necessary.

The suspension’s job is to not only keep a comfortable ride; it is also to provide optimal handling characteristics. Properly functioning suspension will keep alignment within specification in a straight line and in the corners. Moreover, this keeps the tires from wearing unevenly. At each service interval, it is recommended to check the suspension components for any squeaks, rattles, leakage, or play.

Leave a Reply

Your email address will not be published. Required fields are marked *